What Causes Wells to Break?
Why do water wells break? It’s a little like asking why cars break down or computers crash. There isn’t just one answer.
A hand pump is a piece of machinery, and in a busy village or school, it may be used for ten hours or more every day. Over time, moving parts wear out, components can corrode, and small maintenance problems can become much bigger ones.
It’s also important to understand that a broken pump doesn’t necessarily mean the underground water source has failed. In the majority of cases, the borehole would still able to access water, if the equipment used to bring that water to the surface was still in working order.
At Drop in the Bucket, we’ve learned that keeping wells working requires more than good drilling. It takes durable materials, trained local people, community participation, and a realistic plan for maintenance and repairs.
1. Heavy Daily Use Wears Out Hand Pumps
Imagine a piece of machinery being operated almost continuously, every day, by dozens or even hundreds of people.
That’s the reality for many hand pumps at rural schools and village wells. The pump handle moves up and down throughout the day, placing repeated stress on its internal components.
At schools, younger children sometimes lack the arm strength to operate the pump comfortably. Instead, they may lean their entire body weight on the handle, rocking up and down almost like a seesaw.
This can place additional strain on the pump, particularly if the handle is pushed beyond its intended range of movement.
One practical solution is to install a sturdy wooden frame that limits how far the handle can travel. When properly designed and installed, this can help prevent excessive movement and reduce unnecessary stress on the pump.
2. Lack of Preventative Maintenance
Another common reason wells stop working is that small maintenance problems are not addressed before they become serious.
Hand pumps contain components such as seals, valves, bearings, and connecting rods. These parts experience wear and may eventually need adjustment or replacement.
In many cases, the people using a well are not deliberately neglecting it. They simply haven’t been shown what to look for or how to respond when something starts going wrong.
That’s why preventative maintenance training is so important.
How DROP addresses this: We train local hand-pump mechanics and teach community members how to recognize early signs of problems. The goal is for communities to handle routine maintenance and minor repairs without depending on outside organizations for every breakdown.
A small repair completed promptly can prevent a much more expensive problem later.
3. Communities Need to Be Involved From the Beginning
Building a well is often faster when an experienced construction team handles everything from start to finish.
But there’s an important reason to involve the community in the process.
When people participate in planning, preparing the site, and making decisions about how the well will be managed, they’re more likely to see it as a resource they share responsibility for.
Without that participation, a community may understandably assume that the organization that built the well will always be responsible for repairing it.
That creates a dependency that can be difficult to sustain over the long term.
How DROP addresses this: We work with communities to establish water management committees and clarify responsibilities before a well is completed.
Building a strong committee takes time. It isn’t always something that can be accomplished in one or two visits, and it’s important to move at a pace that allows community members to participate meaningfully.
4. Corrosion Can Cause Serious Pump Failures
Not every breakdown is caused by moving parts.
For many years, galvanized iron riser pipes were commonly used in hand-pump systems. These pipes carry water from the pump cylinder deep underground to the spout at the surface.
Over time, the protective zinc coating on galvanized pipes can deteriorate. Once corrosion develops, the pipes may weaken, leak, or eventually fail.
In some cases, corrosion can also affect the appearance or taste of the water, leading community members to stop using the well even before it fails completely.
How DROP addresses this: We use stainless-steel riser pipes in our new wells. Stainless steel offers substantially greater corrosion resistance, helping reduce the risk of pipe-related failures and expensive rehabilitation work.
Choosing more durable materials at the beginning can help a well remain operational for longer.
5. Replacement Parts Must Be Available
Even a well-maintained pump will eventually need replacement parts.
This becomes a serious problem when a pump uses components that are difficult to find, expensive to import, or unfamiliar to local mechanics.
A well might remain out of service for weeks or months while the community waits for a relatively inexpensive part.
How DROP addresses this: We favor India Mark II hand pumps because they’re durable, relatively simple to maintain, and widely used throughout East Africa.
Their standardized design means replacement parts are generally easier to obtain, and local mechanics can be trained to perform common repairs.
6. Sometimes the Biggest Problem Is a Lack of Money
This may be the most important factor of all.
Imagine a village where the hand pump stops working because a part costing $20 or $40 needs replacing.
To someone living in the United States, that may not sound like a major expense. But for a community without savings or a system for collecting repair funds, it can be enough to leave the well out of service.
Whether the repair costs $40 or $5,000, the result is the same if the community cannot afford it: people lose access to their water supply.
So how do we help communities prepare for repairs before something breaks?
For DROP, one important answer has been to help establish Village Savings and Loan Associations, commonly known as VSLAs.
How Village Savings and Loan Associations Help Keep Wells Working
A VSLA is a community-based savings and lending group that allows members to contribute money regularly and access small loans.
Members can use these loans to start or expand small businesses, purchase agricultural supplies, or manage household expenses. As savings grow, communities can become better prepared to meet unexpected costs.
When linked to a water management plan, these savings activities can also help support the funds needed for pump maintenance and repairs.
The benefits extend beyond the well itself. Families can develop new sources of income, build financial skills, and strengthen their ability to plan for the future.
At DROP, VSLAs have become an important part of our approach to sustainability because they address one of the underlying reasons wells remain broken: communities may know what needs fixing but lack the resources to pay for it.
What Happens When a Well Breaks?
Not every broken well requires a new borehole.
Some problems can be fixed by replacing worn seals, valves, bearings, or other pump components. More serious failures may require replacing riser pipes, repairing the pump cylinder, or carrying out a larger rehabilitation.
In other cases, the problem may involve the borehole itself, such as sediment buildup, reduced water yield, or damage to the casing or screen.
The first step is to identify the cause of the failure. If the borehole remains viable, repairing or rehabilitating an existing well can often restore access to clean water without the expense of drilling an entirely new one.
Building Wells That Last
There is no such thing as a hand pump that will never need maintenance.
What matters is whether a community has the knowledge, tools, replacement parts, and financial resources to keep its water supply functioning.
That’s why DROP’s work doesn’t end when a well is drilled. We invest in durable materials, train local pump mechanics, help establish water committees, and support community savings initiatives.
The goal isn’t to build wells that never break. It’s to build water systems that communities can maintain, repair, and depend on for years to come.
